Channel 0 configure register 0
DIV_CNT | This register is used to configure the divider for clock of CHANNEL%s. |
IDLE_THRES | When no edge is detected on the input signal and continuous clock cycles is longer than this register value, received process is finished. |
MEM_SIZE | This register is used to configure the maximum size of memory allocated to CHANNEL%s. |
CARRIER_EFF_EN | 1: Add carrier modulation on the output signal only at the send data state for CHANNEL%s. 0: Add carrier modulation on the output signal at all state for CHANNEL%s. Only valid when RMT_CARRIER_EN_CH%s is 1. |
CARRIER_EN | This is the carrier modulation enable-control bit for CHANNEL%s. 1: Add carrier modulation in the output signal. 0: No carrier modulation in sig_out. |
CARRIER_OUT_LV | This bit is used to configure the position of carrier wave for CHANNEL%s. 1’h0: add carrier wave on low level. 1’h1: add carrier wave on high level. |